Distech Controls ECLYPSE ECY-VAV User Manual

3 / 16
£ Always use unshielded cabling with a minimum Category 5 (CAT5) cable for ethernet communications.
£ Do not connect the universal inputs, analog/digital outputs or common terminals to earth or chassis ground (unless stated otherwise and/or using
shielded Ethernet cable).
Module Enclosure Dimensions
±0.20
[± 5]
2.27 [57.62]
7.90 [200.61]
6.09 [154.76]
0.55 [13.85]
0.86 [21.95]
5.51 [139.93]
2.75 [69.96]
3.70 [94.04]
Front Profile
0.40 [10.05]
1.25 [31.75]
Inches [Millimeters]
2.27 [57.62]
Sliding Grommet
Damper Shaft
Clamping
Mechanism
Opening for
Damper Shaft
Typical Electrical Connectors
Typical Electrical Connectors
Actuator
Clutch for
Manual
Adjustment
Pressure Sensor Inputs –
High-Low Sensor Connection
Polarity is Unimportant
Figure3: ECY-VAV Model Dimensions and Component Identification (Typical)
7.90 [200.61]
6.09 [154.76]
0.55 [13.85]
0.86 [21.95]
3.70 [94.04]
Front Profile
8.17 [207.59]
2.75 [69.96]
Ø 0.875 (7/8)
[Ø 22.23]
2 Positions
½-inch
knockout:
5.42 [137.63]
2.27 [57.62]
0.40 [10.05]
1.25 [31.75]
Inches [Millimeters]
±0.20
[± 5]
Sliding Grommet
Figure4: ECY-VAV-PoE Model Dimensions

Distech Controls ECLYPSE ECY-VAV Specifications

General

Brand	Distech Controls
Model	ECLYPSE ECY-VAV
Category	Controller
Language	English