Service - 56 100sx Operator’s Manual
Service Precautions
Service Precautions
Cleaning Precaution
Welding Precaution
Read operator’s manual. Know how to use all controls.
Your safety is at stake. 273-475
To help avoid injury:
• Unless otherwise instructed, all service should be performed with engine off.
• Allow equipment to cool before performing service.
• Refer to engine manufacturer’s manual for engine maintenance instructions.
NOTICE: When cleaning equipment, do not spray electrical components with water.
NOTICE: Welding can damage electronics. Welding currents can damage electronic components.
Connect welder ground close to welding point and make sure no electronic components are in the
ground path.
To Next Page
Loading...
