100sx Operator’s Manual Transport - 39
Haul
Haul
Load
1. Start engine. See page 34 for proper start-up procedures.
2. Reposition or remove plow blade.
3. Slowly drive plow onto trailer.
4. Position plow on trailer deck for proper weight distribution.
5. Turn plow off. See page 35 for proper shutdown procedures.
6. Attach chains to plow where tie-down decals are located. See page 40.
Crushing weight. If load falls or moves it could kill or crush
you. Use proper procedures and equipment or stay away.
To help avoid injury:
• Load unit with engine in low idle.
• Load trailer on level ground.
• Load trailer correctly to avoid trailer swaying.
• Attach trailer to vehicle before loading or unloading.
• If loading onto a tilt-bed trailer, ensure that tilt latch is secured in the correct position.
• Ten to fifteen percent of total vehicle weight (equipment plus trailer) must be on tongue to help
prevent trailer sway.
To Next Page
Loading...
