Service - 108 FX30/FXT30 Operator’s Manual
50 Hour
Check Water Pressure Hoses
Check hoses every 50 hours for wear or damage.
Replace as necessary.
Lube Blower Bearings
Wipe two zerks clean and lube every 500 hours
with HTG. Inject grease into zerk until clean
grease comes out of relief fittings.
Debris Tank
Lube Tank Pivot Pins
Lube two pins every 50 hours with MPG.
NOTICE: Do not inject grease too quickly.
Drive shaft seal damage could occur.
j33om037h.epsj33om037h.eps
j33om038h.epsj33om038h.eps
j33om039h.epsj33om039h.eps
To Next Page
Loading...
