Vacuum and Pothole - 66 FX30/FXT30 Operator’s Manual
Connect Hoses
Connect Hoses
1. Remove vacuum hoses from storage.
2. Connect hoses. Secure all locking clamps.
3. Ensure drain/outlet valve is closed.
Determine Tank Fill Level (FX30 Trailer Only)
Use these reference charts to help determine how full of various materials the vacuum tank can be without
overloading trailer. Exceeding the maximum fill level will overload the trailer.
Never exceed the trailer capacity. You can exceed the vacuum tank lifting capacity. Drain the tank down to
the lifting capacity before lifting tank.
To use these charts, first select the appropriate table based on trailer and vacuum tank size. Next find the
material being excavated. If the material being excavated is not listed, find a material with similar density.
Then, determine the maximum fill level based on the amount of water in the water tank.
IMPORTANT: For all materials, the vacuum tank should be no more than half full when lifting the tank.
To Next Page
Loading...
