FX30/FXT30 Operator’s Manual Vacuum and Pothole - 77
Pothole
7. Ensure that water sprays from nozzle. If it does not, nozzle may be clogged and pump will not function
properly. Clean or replace nozzle as necessary.
8. When freshwater tank is empty, stop operation and turn water pump switch to off.
With Air
Set Up
1. Remove air lance from storage.
2. Connect air lance to air hose.
• Align ends and move together.
• Twist to engage latch.
3. Slowly open service valve (shown).
NOTICE: Do not continue to operate with freshwater tank empty. Running water pump with no
water will damage pump.
IMPORTANT: Open service valve slowly
to prevent velocity fuse from activating. If
fuse activates, air pressure at the lance
tip will be very low. Close service valve
and slowly open it to remedy situation.
To Next Page
Loading...
