Controls - 34 FX30/FXT30 Operator’s Manual
Power Pack
8. Hydraulic function
switch
To operate the vacuum boom
option, press top.
To operate hydraulic door lift,
move to center position.
To operate hydraulic tank tilt,
press bottom.
9. Tethered tank control To lift and lower tank, set
hydraulic function switch to
the tank position, then
• To lift tank, press UP.
• To lower tank, press
DOWN.
To open and close tank door,
set hydraulic function switch
to the door position, then
• To open door, press UP.
• To close door, press
DOWN.
IMPORTANT: These functions are
also included on the wireless control
module.
Item Description Notes
To Next Page
Loading...
