FX30/FXT30 Operator’s Manual Controls - 41
Machine Controls
Item Description Notes
1. Inlet valve To close valve (stop suction),
rotate up.
To open valve (start suction),
rotate down.
NOTICE: Do not idle engine with inlet
valve closed.
2. Water tank supply valve To open valve (send water
from the water tank through
the pump and wash wand),
rotate counterclockwise.
To close valve (stop water
flow), rotate clockwise.
IMPORTANT: Water tank supply
valve or antifreeze supply valve must
be open when pump is running or
pump will be damaged.
3. Water tank drain To drain tank, open valve.
Close valve when tank is
empty.
4. Drain/Outlet valve To drain tank, rotate down.
To close drain, rotate up.
To Next Page
Loading...
