FX30/FXT30 Operator’s Manual Controls - 47
Vacuum Boom (optional)
2. Boom up To raise boom, press.
To stop movement, release.
NOTICE:
• Do not use boom to raise or lower
objects.
• Do not use boom to break
vacuum when hose is stuck to
material being vacuumed. Use
inlet valve.
3. Boom down To lower boom, press.
To stop movement, release.
NOTICE: Do not use boom to raise or
lower objects.
4. Boom retract To retract boom, press.
To stop movement, release.
5. Boom extend To extend boom, press.
To stop movement, release.
Item Description Notes
To Next Page
Loading...
