Ditch Witch JT30 - Page 35

Controls - 35 JT30 /JT30 All Terrain Operator’s Manual
Left Control Console
CMW
6. Pipe gripper switch To close, press top.
To open, press bottom.
To stop grippers, release.
7. Pipe lubricator switch To apply joint compound,
press top.
Applies joint compound to threads at
wrenches.
8. Pipe position switch To shift pipe box away from
operator, press top.
To shift pipe box toward
operator, press bottom.
To stop pipe box, release.
IMPORTANT: See “Shift Pipe Box” on
page 159.
9. Add pipe/manual/
remove pipe switch
To select “add pipe”
automated pipeloader
function, press top.
To use manual pipeloader
controls, move to center.
To select “remove pipe”
automated pipeloader
function, press bottom.
See “Enable Automated Pipeloader
System” on page 112.
10. Set/Resume switch To resume operation or
increase operation levels,
press top.
To set operating conditions or
reduce operation levels,
press bottom.
See “Cruise Control” on page 164.
See “AutoCarve switch” on page 37
and 119.
See “Pipeloader” on page 156.
Item Description Notes
RESUME /
SET /
c00ic113h.eps