DITEC E1T - Page 2

2
IP1897EN • 2012-03-22
INDEX
All right reserved
All data and specications have been drawn up and checked with the greatest care. The manufacturer cannot
however take any responsibility for eventual errors, ommisions or incomplete data due to technical or illustra-
tive purposes.
Subject Page
1. General safety precautions 3
2. EC declaration of conformity 4
3. Technical data 4
3.1 Applications
4
4. Connection of power supply 4
5. Commands 5
5.1 SOFA1-SOFA2 self-controlled safety edge
5
6. Outputs and accessories 6
7. Adjustments 7
8. Start-up 8
9. Troubleshooting 9
10. Example application for sliding gates 10
11. Example application for sectional overhead doors 11
CAPTION
i
STOP
This symbol indicates instructions or notes regarding safety issues which require particular attention.
This symbol indicates informations which are useful for correct product function.
This symbol indicates options and parameters which are only available with the indicated item.
This symbol indicates options and parameters which are not available with the indicated item.
This symbol indicates instructions or notes intended for technical and expert personnel.
This symbol indicates operations not to be e󰀨ected for not compromise the correct operation of the
automation.