Need help?Do you have a question about the DivioTec NDR153P and is the answer not in the manual?
Provides a general introduction to the camera's features and purpose.
Details about the camera's cable types and connection points.
Step-by-step guide for physically mounting the camera.
Instructions on how to access the camera's settings via its web interface.
Guide to download and install the CAM-FINDER software for camera management.
Instructions on how to find and open the CAM-FINDER application.
How the software searches for cameras and displays their information.
Explanation of buttons like Search, Assign IP, Home Page, and Firmware Upgrade.
Detailed breakdown of sections like Preview, Information, Camera List, and Device Mark.
Steps to open the camera interface using a web browser and login.
Notes on VLC Media Player for video display and browser compatibility.
Explanation of buttons used for controlling the camera's zoom function.
Methods for adjusting camera focus, including auto and manual options.
Instruction to click the 'Setup' button to enter the camera configuration menu.
Details on configuring video parameters like resolution and frame rate.
Options for image adjustments such as exposure, ROI, and privacy zones.
Configuration options for network protocols, FTP, SSL, SSH, etc.
Configuration for the primary video stream, including codec, resolution, and frame rate.
Explanation of Rate Control modes and the Smart ROI feature.
Enabling Smart GOP and configuring video stream bit rate.
Configuration options for the secondary video stream.
Configuration for the third video stream, including resolution and quality.
How to apply all the video configuration changes.
Selecting Day/Night profile and configuring Auto Exposure (AE) modes.
Setting control for exposure time, including manual definition.
Configuring camera gain and enabling Backlight Compensation.
Features for Wide Dynamic Range, White Balance, Defog, and Noise Reduction.
Configuring Image Profile and Day/Night control modes.
Options for controlling the Infrared (IR) cut filter.
Flipping and rotating the camera image for different viewing angles.
Configuring video stabilization and sharpness adjustment.
Configuring image brightness and hue.
Options to restore default or previous image settings.
Setting up Region of Interest (ROI) and image quality levels.
How to define and remove specific areas for ROI monitoring.
Masking areas of the video stream for privacy protection.
Defining and removing specific areas to be masked.
Configuring camera name and background for OSD.
Selecting content like date/time and camera name for display.
Configuring IP address, subnet mask, gateway, and DNS.
Setting HTTP/HTTPS ports and viewing hardware address.
Configuring RTMP function and URL for streaming.
Enabling/disabling FTP access and setting password/connections.
Setting the FTP login password and maximum connection limit.
Selecting SSL mode (Disabled, Optional, Required).
Options for installing a new CA certification.
Enabling/disabling SSH access and setting password.
Selecting protocols like EAP-MD5, EAP-TLS for 802.1x.
Settings for SNMP server, V2c, V3, authentication, and privacy.
Specifying destination IP for SNMP trap messages.
Enabling or disabling IP address filtering (Allow/Deny/OFF).
Setting up filters for up to 8 IP addresses and protocols.
Enabling LDAP and configuring server, port, and DN details.
Enabling DDNS service and configuring hostname, server, and user credentials.
Setting up RTSP authentication and port numbers for streams.
Enabling RTSP unicast for streams and configuring pathnames.
Configuring RTSP multicast for video and audio streams.
Setting multicast IP addresses and ports for video streams.
Configuring multicast settings for Stream 3.
Setting the Time-To-Live for multicast datagrams.
Enabling GB28181 settings and configuring SIP server details.
Setting the format for displaying the current date and time.
Configuring time server and manual time setting.
Viewing firmware version, model name, serial, and MAC address.
Instructions on how to update the camera's firmware.
Options to reset camera parameters to default or factory default.
Creating backups and restoring camera configurations.
Switching between NTSC and PAL video systems.
Setting the administrator password for the camera.
Adding, deleting, and managing user accounts.
Defining user access levels (Admins, Views).
Guidelines for creating usernames and passwords.
Enabling or disabling the alarm schedule setup.
Configuring the daily schedule for alarm events.
Setting up areas for monitoring motion detection.
Configuring the sensitivity level for motion detection.
Configuring the daily schedule for motion detection events.
Enabling or disabling the tampering alarm function.
Configuring the daily schedule for tampering alarm events.
Enabling object detection and selecting detection methods.
Selecting methods like Line counting, Line crossing, Zone counting.
Setting up areas for zone intrusion detection.
Configuring counting direction and methods (One way, Two way).
Enabling/disabling the detection area for monitoring objects.
Configuring the daily schedule for object detection events.
Configuring event triggers for FTP upload and server details.
Specifying FTP server host address, port, username, and password.
Configuring email sender details and event triggers for notifications.
Configuring SMTP server address, port, username, and authentication.
Selecting SMTP authentication mode (NO_AUTH, LOGIN, TLS_TLS).
Setting up multiple email addresses for event notifications.
Configuring event triggers for network storage and server address.
Setting up network address, share name, and record type.
Establishing and deleting network storage connections.
Configuring event trigger options for connected devices via DI/DO.
Mapping events like Alarm, Motion to Alarm out trigger.
Configuring event triggers for SD recording and scheduling.
Displaying SD card availability, usage, status, and overwrite settings.
Option to format the SD card, erasing all data.
Setting the number and interval of pre-event snapshots.
Setting the number and interval of post-event snapshots.
Configuring the length of pre-event recordings.
Configuring the length of post-event recordings.
General| Model | NDR153P |
|---|---|
| IR Range | Up to 30m |
| Night Vision | Yes |
| Operating Temperature | -30 °C to 60 °C (-22 °F to 140 °F) |
| Ingress Protection | IP67 |
| Lens | 2.8mm |
| Power Supply | PoE (802.3af) |
| Operating Conditions | Indoor/Outdoor |
To Next Page
