dji A2 - Configure Using Assistant Software on a PC

©2013 DJI Innovations. All Rights Reserved 15 |
Installer in DMG format supports only Mac OS X 10.6(Lion) or above.
Usage of A2 Assistant software on Mac OS X and Windows are exactly the same. The Assistant
software pages appear in other places of this manual are on the Windows for example.
1.2.2 Configure using Assistant Software on a PC
A2 flight control system can takes power via the USB port during configuration, no additional battery is required.
Note that the USB port can supply power no more than 500mA, an additional battery is necessary if connection
failure or intermittent working.
Run the assistant software, and follow the built-in guide to carry out the configuration. Note that you may be asked
to register for first time use.
1
2
3
4
Setting
Options
Built-in
Guide
Menu
1. View
2. Restore &Upgrade
3.Set
4.Check
Click “Info” to view
user information
and software
version etc.
Enter “Tools” to restore default
settings. And check whether the
firmware is the latest.
Enter “Basic” page.
Set the Aircraft,
Mounting, RC, Gain”
in each tab.
Enter “View”
page to check all
basic settings.