EasyManua.ls Logo

dji A2 - Specifications

dji A2
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
©2013 DJI Innovations. All Rights Reserved 37 |
Specifications
General
Built-In Functions
Built-in Receiver
Multiple Control Modes
2-axle Gimbal Supported
Enhanced FailSafe
Intelligent Orientation Control
Dynamical Systems Protection
PC & Bluetooth Ground Station
External Receiver Supported
9 Types of Supported Multi-rotor
Other DJI Products Supported
Low Voltage Protection
4 Configurable Outputs
Sound Alarm
Configure Parameters Via Bluetooth
Peripheral
Supported Multi-rotor
Quad-rotor: I4, X4
Hexa-rotor: I6, V6, Y6, IY6
Octo-rotor: X8, I8, V8
Supported ESC output
400Hz refresh frequency.
Supported Transmitter for Built-in Receiver
Futaba FASST (MULT, MLT2, 7CH) Series and DJI DESST Series
External Receiver Supported
Futaba S-Bus, DSM2, PPM
Recommended Battery
2S ~ 6S LiPo
Other DJI Products Supported
Z15, iOSD Mark II, D-BUS Adapter, S800 EVO, 2.4G Data Link,
H3-2D
Electrical & Mechanical
Power Consumption
MAX 5W (Typical Value: 0.3A@12.5V
Operating Temperature
-5°C to +60°C
Total Weight
<= 224g (overall)
Dimensions
MC: 54mm x 39mm x 14.9mm
IMU: 41.3mm x 30.5mm x 26.3mm
GPS-COMPASS PRO: 62 mm (diameter) x 14.3 mm
PMU: 39.5mm×27.6mm×9.8mm
LED-BTU-I30mm x 30mm x 7.9mm
Flight Performance (can be effected by mechanical performance and payloads)
Hovering Accuracy (In GPS ATTI. Mode)
Vertical: ± 0.5m
Horizontal: ± 1.5m
Maximum Wind Resistance
<8m/s (17.9mph / 28.8km/h)
Max Yaw Angular Velocity
150deg/s
Max Tilt Angle
35°
Ascent / Descent
6m/s

Related product manuals