dji AGRAS MG-1P Series - Page 17

AGRAS MG-1P SERIES Quick Start Guide
©
2018 DJI All Rights Reserved.
17
Operate the aircraft carefully when ying near obstacles to avoid collision.
Calibration points are used to rectify ight route biases caused by GNSS positioning deviations. Choose one or more xed
reference points for calibration like a metal peg or obvious marker that is easy to identify for bias rectication when using
the plan.
Only take o in open areas.
An operation can be paused by toggling the Pause switch. The aircraft will hover and record the breakpoint, and then the
aircraft can be controlled manually. To continue the operation, tap Resume in the app and the aircraft will return to the
breakpoint automatically and resume the operation.
The aircraft will hover at the end point of the ight route once the operation is complete. Instead of hovering the aircraft
can also be set to perform other ight actions in the app.
Starting an Operation
Adjust the ight route:
route angle, line spacing,
and collision avoidance
safety margin
Tap Rectify
Oset
Tap Perform an
Operation
Set the operation
parameters, then
conrm
Slide the slider to start
the operation
Take the aircraft to
one of the calibration
points
Tap Perform an
Operation in the app
main screen
Refer to the Agras MG-1P / MG-1P RTK User Manual for details.
Tap , select the eld
from the eld list and select
Use
More Operation Modes
Refer to the Agras MG-1P / MG-1P RTK User Manual for details about the A-B Route, Manual, and Manual Plus
operation modes.
More Functions
Operation Resumption System Data Protection
Empty Tank Warning