dji Agras T25

AGRAS T50/T25
Unmanned Aircraft Flight Manual
14
©
2023 DJI All Rights Reserved.
Binocular Vision System Usage Notice
The performance of the binocular vision system is affected by light intensity and the
patterns or texture of the surface being flown over. Operate the aircraft with great
caution in the following situations:
a. Flying over monochrome surfaces (e.g., pure black, pure white, pure green).
b. Flying over highly reflective surfaces.
c. Flying over water or transparent surfaces.
d. Flying in an area where the lighting changes frequently or drastically.
e. Flying over extremely dark (< 10 lux) or bright (> 10,000 lux) surfaces.
f. Flying over surfaces with repeating identical patterns or textures or with
particularly sparse patterns or textures.
Keep the cameras of the binocular vision system clean at all times.
Make sure that there are clear patterns and adequate lighting in the surroundings
since the binocular vision system relies on images of the surrounding environment to
obtain displacement data.
The obstacle sensing function of the binocular vision system may not work properly
when the aircraft is operated in a dim environment or over water or surfaces without
a clear pattern.
Keep the cameras of the binocular vision system clean. Make sure that the aircraft is
powered off. First remove any larger pieces of grit or sand then wipe the lens with a
clean, soft cloth to remove dust or other dirt.
Control Station
Prole
The DJI RC Plus (Agras) remote controller features DJI O3 Agras image transmission technology,
and has a max transmission distance of up to 5 km (at an altitude of 2.5 m).
[1]
The remote
controller has an 8-core processor and a built-in 7.02-in high brightness touchscreen powered
by the Android operating system. Users can connect to the internet via Wi-Fi or the DJI Cellular
Dongle. Operations are more convenient and accurate than ever before thanks to the revamped
DJI Agras app design and a wide range of buttons on the remote controller. With Mapping
mode added to the app, users can complete offline reconstructions and perform precise field
planning without the need of extra devices. The remote controller has a maximum operating
time of 3 hours and 18 min with the high-capacity internal battery. Users can also purchase an
external battery separately to be used to supply power to the remote controller and fully meet
the requirements for long and high-intensity operations.
[1] The remote controller is able to reach its maximum transmission distance (FCC/NCC: 7 km (4.35 mi);
SRRC: 5 km (3.11 mi); CE/MIC: 4 km (2.49 mi)) in an open area with no electromagnetic interference and at
an altitude of approximately 2.5 m (8.2 ft).