AGRAS T50/T25
Unmanned Aircraft Flight Manual
©
2023 DJI All Rights Reserved.
41
1
2
3
Battery Release Button
To remove the WB37 battery, press and hold the battery release button and push the
battery downward.
Preparing the Remote Controller
Mounting the WB37 Intelligent Battery
Follow the instructions below to mount the battery if using the WB37 Intelligent Battery for the
remote controller power supply.
1. Push the rear cover release button to the end to open the rear cover.
2. Insert the WB37 battery into the battery compartment and push it to the top. There will be
a clicking sound to indicate the battery is installed firmly.
3. Close the rear cover.
To Next Page
Loading...
