2.5 Assist Modes
The drive system provides four standard assist modes: Auto, Eco, Trail, and Turbo, and
also supports Boost mode with high power output and Walk mode.
• Refer to Control Display and Wireless Controllers section to learn how to switch
the assist modes.
• When connected to the app, users can customize the assist parameters. Refer to
Customizing Assist Modes for more details.
Standard Mode
The four standard modes oer varying level of assistance to handle dierent riding
scenarios.
Auto: This mode automatically adjusts assistance based on dierent riding situations,
providing a moderate level of assistance to enhance the range.
Eco: With gradual start-up acceleration and lower assistance, this mode conserves battery
energy and is suitable for long-distance at terrain riding.
Trail: This mode provides moderate start-up acceleration and stronger assistance and is
suitable for cross-country technical route.
Turbo: This mode provides maximum assistance and is suitable for steep slopes.
Boost Mode
In addition to the standard assist modes, the drive system also support the Boost mode
with extra assistance for a short duration, which can help users riding with greater
drive torque and power. This mode is suitable for challenging riding scenarios such as
overcoming obstacles and climbing hills.
Press and hold
to activate Boost mode. During the period, the assistance will shut o
when you stop pedaling. To exit Boost mode, press the power button or assistance level
increase/decrease buttons.
Walk Mode
Press and hold to activate Walk mode, then press and hold the button to get power
assistance when pushing the bike or starting upon an incline. It also supports auto hold to
prevent rollback on slopes.
DJI Avinox User Manual
12 © 2024 DJI All Rights Reserved.
To Next Page
Loading...