3. Tap View Bike Location in the app to check the real-time location and movement
trajectory of the bike on the map.
• If there is no risk of theft, tap Beep o & Keep Locked in the prompt to disable
the beeping. The bike will remain locked.
• If the movement is authorized, tap Authorize & Unlock to unlock the bike or tap
Cancel and enter password on the bike screen to disable the alarm and unlock
the bike.
• After tapping Authorize & Unlock, the accident detection function will be
disabled for an hour. The alert will not be triggered by any movement in that
period.
4. To disable the function, tap Bike Protection > Suspend Temporarily and select the
suspending time.
Remote Bike Control
When the bike is connected with the mobile phone via Bluetooth or mobile data, tap
Security in the app to expand the map view to check the real-time bike location and
status. If the bike is moved, the movement trajectory will be displayed on the map. When
the drive system is powered on, the bike can be located by enabling the beep using the
app. You can also use the app to set the assist modes and other settings remotely.
• When connected to the bike via Bluetooth, users can power on the bike using
the app.
Disable Bike Protection
Users can disable the bike protection functions in the app. It is required to enter the
password when disabling the password authentication function. Once disabled, mobile
key unlock and theft detection functions will no longer be available. Users can also disable
these two functions individually with the password authentication is still available.
3.3 Setting Bike Screen
Open the app and tap Bike Screen Display to edit, add, and delete the data pages on the
bike screen.
• Before setting, make sure the drive system is powered on and connected to the
mobile phone.
DJI Avinox User Manual
© 2024 DJI All Rights Reserved. 17
To Next Page
Loading...