3.4 Adding Accessory
The drive system is able to connect with various accessories, providing more ways to
record data during riding.
• It is not supported to connect to multiple accessories of the same type
simultaneously. Disconnect from the previous device before pairing with a new
one.
• When connecting a new wireless controller, press and hold the two buttons on
the wireless controller simultaneously until the indicator ashes green and then
follow the instructions to connect.
1. Press and hold the power button of the control display to power on, and then power
on the accessory.
2. Swipe up the bike screen to enter Settings. Tap Accessories > Add and the system will
start searching for nearby devices.
3. Tap the device name displayed on the bike screen to start pairing. Follow the on-
screen instructions to complete the connection.
The added device are displayed on the Accessories page. Tap the device name to view the
detailed information. Tap Forget Device to unpair with the device.
3.5 Gear Shifting Suggestions
The drive system can provide gear shifting suggestions during riding. The suggestions
can help users select more appropriate gear when riding uphill, improving the pedaling
eciency and riding experience.
Power on the control display and swipe up the screen, then tap Gear Shifting
Suggestions to enable the function. After enabling, the gear suggestion will be shown
on the bike screen if there is a more suitable gear position for the current condition.
• Shifting the gear according to the prompt helps maximize the eciency of the
assistance while reducing the tension on the chain.
DJI Avinox User Manual
18 © 2024 DJI All Rights Reserved.
To Next Page
Loading...