dji AVINOX - Password Authentication; Mobile Key Unlock; Accident Detection

To Next Page

To Previous Page

• It is only supported to set the bike protection functions when the bike and

mobile phone are connected via Bluetooth.

• The notications can be pushed to the mobile phone only after enabling the app

notication permission on the phone.

Password Authentication

Open the app, tap Bike Protection > Password Authentication. Follow the instructions to

set the password.

After setting on the app, restart the control display and enter the password on the bike

screen to unlock, indicating that the password authentication is now eective.

Mobile Key Unlock

After enabling the password authentication, users can enable Mobile Key Unlock function.

1. Open the app, tap Bike Protection and then enable Mobile Key Unlock. When

enabled, the bike will be automatically locked when powered o.

2. When you are close to the bike with the paired phone, powering on the control

display will automatically unlock the bike without entering the password.

• The drive system will power o and be locked automatically when the parking

time exceeds the set duration of auto power o.

• It is recommended to also use a physical lock for added security.

Accident Detection

After enabling Password Authentication, users can activate the accident detection

function.

1. Open the app, tap Bike Protection > Theft Detection.

2. After enabling the function, if any accident movement is detected while the bike is

locked:

• The control display will sound an alarm and an alert will display on the screen.

• The app will prompt a notication at the same time.

• The accident movement will trigger a notication in the app only if the bike

and mobile phone remain connected. Otherwise, only the control display

will sound an alarm.

DJI Avinox User Manual