dji AVINOX - Maintenance; Replacing Battery of Controller; Cleaning

To Next Page

To Previous Page

4 Maintenance

4.1 Replacing Battery of Controller

The indicator of the wireless controller will ash red when the battery level is too low.

Follow the illustrations to replace the battery.

2.5mm

0.5-0.6 Nm

CR1620

• DO NOT use metal tools to remove the battery as it may cause a short circuit.

• Make sure to clean the installation area and the bolts after repeatedly

disassembling. Otherwise, it may cause abnormal noise during attaching and

detaching.

4.2 Cleaning

The frequency of maintenance varies depending on the riding conditions. Make sure to

turn the battery o and close the covers of the charging port and Type-C port before

cleaning. Clean dirt on surface using a soft, dry cloth. If necessary, use a damp cloth and

neutral detergent to clean.

• Improper cleaning may cause damage to electrical components.

DJI Avinox User Manual