dji Focus - Firmware Update; Installing the DJI PC;MAC Assistant

DJI FOCUS
User Manual
20
©
2015 DJI. All Rights Reserved.
travel limit and select Set Point 2. Turning the focus wheel from Point 1 to Point 2 will rotate the
camera focus by a full cycle.
LED Control: Enable or disable the LED and system status indicators on the remote controller
and motor individually.
Default: Restores the default settings for the remote controller.
About: Displays the current rmware version of the remote controller.
The remote controller’s Lock function can also be used with the Zenmmuse X5.
Firmware Update
The DJI Focus rmware can be updated through the DJI PC/MAC Assistant.
Installing the DJI PC/MAC Assistant
Windows
1. Download the DJI WIN DRIVER INSTALLER and Assistant from the Ronin-M product page on
DJI.com.
2. Double click the Assistant installer and follow the steps to nish the installation. Then, launch
the Assistant.
TIPS
The Assistant installer can be used on Windows XP (32 or 64 bit) or above.
Mac OS X
1. Download the Assistant installer (.DMG) from DJI.com, and then run the installer and follow
the prompts to nish the installation.
2. When launching for the rst time, if using Launchpad to run the Assistant, Launchpad will
block access because Assistant has not been reviewed by the App Store. Locate the
Gimbal icon using the Finder, press Control, then click the icon (or right-click the icon using
a mouse). Choose Open from the shortcut menu, then click Open in the dialog box to launch
the program.
3. After the first successful launch, double click the Gimbal icon, as usual, to launch the
program using the Finder or Launchpad.
TIPS
The DMG installer supports Mac OS X 10.9 or above.