EasyManuals Logo

dji NAZA-M User Manual

dji NAZA-M
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
©2013 DJI Innovations. All Rights Reserved.4 |
15. Do NOT move any command sticks during system start and self-check! Please contact us if the
last four green blinks are abnormal.
16. GPS/Compass is sensitive to magnetic interference. YOU should be as far away from any
electronic devices as possible.
17. Do not fly in GPS Mode when the signal is not good (red light blinks)!
18. GPS module is optional (Nonstandard). If you are using the GPS module, users should read
contents about GPS matching in indicators; users without GPS module can skip contents about
GPS.
19. If users set GPS ATTI. Mode in Control Mode Switch without connecting to GPS module, the
M.C. will switch GPS ATTI. Mode into ATTI. Mode automatically, and LED indicator will blink
yellow blinks.
20. Once entering Fail-Safe Mode, the aircraft with GPS will automatically shut off when landed; the
aircraft without GPS will not automatically shut off when landed.
21. Make sure all connections are correct and attachment contacts are in good condition before
flight.
22. Keep wireless video transmission equipment a distance away from the main controller (>25cm),
to prevent any interference from the wireless video transmitter.
Trademark
DJI and NAZA-M are registered trademark of DJI Innovations. Names of product, brand, etc., appearing in
this manual are trademarks or registered trademarks of their respective owner companies. This product and
manual are copyrighted by DJI Innovations with all rights reserved. No part of this product or manual shall be
reproduced in any form without the prior written consent or authorization of DJI Innovations. No patent liability
is assumed with respect to the use of the product or information contained herein.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dji NAZA-M and is the answer not in the manual?

dji NAZA-M Specifications

General IconGeneral
Input Voltage4.8V ~ 5.5V
Firmware UpgradeSupported
Supported ESC Output400Hz refresh frequency
Recommended TransmitterPCM or 2.4GHz with minimum 4 channels
Weight25g
Compass Accuracy±2°
Max Angular Velocity200°/s
Max Tilt Angle45°
Operating Temperature-10°C to +50°C
Assistant SoftwareDJI NAZA-M Assistant
Assistant Software System RequirementWindows XP SP3 / Windows 7 / Windows 8
GPS AccuracyHorizontal: ±2.5m, Vertical: ±0.8m
Max Ascent/Descent Speed6m/s
Hovering AccuracyVertical: ±0.8m, Horizontal: ±2.5m

Related product manuals