©
2024 DJI All Rights Reserved.
5
The protection rating of the spreading system mentioned above may decrease in the
following scenarios:
• If there is a collision and the seal structure is deformed.
• If the seal structure of the shell is cracked or damaged.
• If the waterproof covers are not properly secured.
Introduction
The T50/T25 Spreading System is compatible with the Agras T50/T25 aircraft with spread tanks
of 75 L and 35 L, respectively, and oers ecient and reliable spreading.
The spreading system is equipped with the all-new spinner disk to spread the material more
evenly. The control module on the spreading system and the weight sensors on the aircraft
monitor the remaining weight of the material in the spread tank in real-time to improve the
accuracy of the spread rate control and empty tank warnings. The updated fenders can block
the spreading material that ies upward to prevent it from damaging the propellers. The quick-
release hopper gate allows for easy maintenance and can be replaced easily with the small ow
hopper gate when spreading materials with a small ow or diameter.
Users can congure spreading settings in the DJI Agras app and create specic templates for
different materials in order to meet different requirements. The app also provides warning
prompts for an empty tank as well as for abnormalities in rotational speed, temperature, and
hopper outlet size.
Overview
1. Spread Tank
2. Material Discharge Outlet
3. Cable
4. Spreader
5. Spinner Disk
6. Spreader Lock Knob
7. Fender
1
2
3
4
5
6
7
To Next Page
Loading...
