v.220411 | 11
OPERATION SAFETY
Operate the equipment from within the operator zone as shown in the diagram below.
DANGER: FAILURE TO OPERATE THE EQUIPMENT IN THIS POSITION CAN RESULT IN
SERIOUS INJURY OR DEATH.
ITEM # DESCRIPTION
1 Operator Zone
2 Infeed
3 Engine
4 Foot Plate
DANGER
• Make sure the operator knows how to stop and disengage the equipment before
operating.
• Do not place hands in the feed chute during operation. Serious injury or death
could result.
• Do not straddle or step over the equipment during operation.
• Do not move the equipment while the engine is running.
• Never leave the equipment unattended while the engine is running. Shut o the
engine even if you are leaving the equipment for a short period of time.
• Avoid contact with the muer and other hot areas of the engine during operation or
after running to prevent burns.
1
4
3
2
1
ENGLISH
To Next Page
Loading...
