DK2 Power OPC506E - Safety Conventions; Before Operation Safety

6 | OPC506E(X) man.
SAFETY CONVENTIONS
 DANGER: This indicates a hazardous situation, which, if not avoided, will result in death
or serious injury.
 WARNING: This indicates a hazardous situation, which, if not avoided, could result in
death or serious injury.
 CAUTION: This indicates a hazardous situation, which, if not avoided, may cause minor
or moderate injury.
ADDITIONAL INFORMATION AND POTENTIAL CHANGES
We reserve the right to discontinue, change, and improve our products at any time without
notice or obligation to the purchaser. The descriptions and specifications contained in this
manual were in eect at printing. Equipment described within this manual may be optional.
Some illustrations may not be applicable to your equipment.
BEFORE OPERATION
 WARNING: Read and understand the complete User Manual before
assembling or using this product. Failure to comprehend and comply with
warnings, cautions and instructions for assembly and operation could result in
serious injury or death.
 WARNING: Do not permit children to operate this equipment at any time. Do not permit
others that have not read and understood the complete User Manual to operate this
equipment. Operation of power equipment can be dangerous. It is the sole responsibility
of the operator to understand the assembly and safe operation of this product.
 DANGER: INTENDED USE
Do not use this equipment for any purpose other than chipping wood, for which it was
designed. Any other use is unauthorized and may result in serious injury or death.
 DANGER: PERSONAL PROTECTIVE EQUIPMENT
When operating this equipment, it is essential that you wear safety
gear including goggles or safety glasses, steel-toed shoes and
tight-fitting gloves (no loose cus or draw strings). Always wear ear
plugs or sound-deafening headphones to protect against hearing
loss when operating this equipment.
 CAUTION: Do not wear loose clothing or jewelry that can be caught
by moving parts of the equipment. Keep clothing and hair away
from all moving parts of the equipment.
ENGLISH