High Speed (Refrigerated) Micro-Centrifuge
5
z Ensure to remove any objects and fragments of the tubes dropped inside the rotor
chamber before running this centrifuge.
z Cautions on rotors
1） Always check for corrosion and damages on the rotor surface before using it.
Do not use the rotor or bucket if such abnormality found.
2） Do not set the centrifuge speed override the allowable minimum speed of the
rotor kits (rotor, bucket, or the other adapter). Make sure to run it below the
allowable minimum speed.
3） Do not exceed the allowable imbalance.
4） Use the rotor and tubes within their actual capacities.
5） If the rotor is provided with a cap, ensure it is tightened before the operation.
z If any abnormal condition occurs during operation, please stop it immediately and
contact our service center. Notice the service the alarm code if displayed.
z Earthquake damage is likely to the centrifuge, contact our service center if
abnormality observed.
To Next Page
Loading...