How to fix DLab SK-O330-Pro Laboratory Equipment that can't power on?
If your DLab Laboratory Equipment won't power on, first ensure the power line is properly plugged in and the power switch is on. If the issue persists, the fuse may be broken and require replacement. Alternatively, the power board, main board, or display screen could be faulty and need replacing.
What to do if the DLab SK-O330-Pro instrument doesn’t move?
If the DLab Laboratory Equipment's instrument doesn't move, first make sure that you have set a target temperature, and that the temperature indicator is on. If the issue continues, it could be due to several reasons: * A failure in the drive board (replace it, referring to chapter 2.5). * A failure in the 24V power board (replace the power board component). * Motor failure (replace the motor). * Broken shrapnel (replace the shrapnel). * A loose or broken belt (replace the belt).
General| Brand | DLab |
|---|---|
| Model | SK-O330-Pro |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
