DLab Thermo Mix HCM100-Pro

To Next Page

Thermo Control & Thermo Mix

User Manual

H100-Pro

Thermo Control

HC110-Pro

HM100-Pro

Thermo Mix

100-

Please read the User Manual carefully before use, and follow all operating

and safety instructions!

We cannot be responsible to inform at real-time if the outline and

specifications are subject to change for improvement.

12301086

Ver.20191025

Need help?

Do you have a question about the DLab Thermo Mix HCM100-Pro and is the answer not in the manual?

Summary

Safety Instructions

Proper Use

Inspection

Receiving Inspection

Procedures for checking the instrument for damage upon receipt.

Listing of Items

List of all components included with the main instrument unit.

Control & Display

Control

Details on the instrument's physical controls, buttons, and knobs.

Display

Explanation of the LCD screen interface and its various readouts.

Operation

Parameter setting methods

Step-by-step guide to setting operational parameters like temperature and time.

Start and Stop

Instructions for starting, pausing, resuming, and stopping instrument operation.

Running

Details on different running modes and procedures.

Single Step Work Without Saving

Performing a single operation cycle without saving the parameters.

Multiple Step work without Saving

Setting up and running sequential operations without saving the program.

Program with Saving mode

Creating and saving multi-step operational programs.

Load Program

Retrieving and executing previously saved operational programs.

Single function running

Operating the instrument using only one specific function.

Temperature calibration

Procedure for calibrating the instrument's temperature accuracy.

Restore the factory settings

Steps to reset the instrument to its original factory default configuration.

Trial Run

Faults

Maintenance and Cleaning

Associated Standards and Regulations

Specifications