DLab Thermo Control H100-Pro - User Manual

Thermo Control & Thermo Mix
User Manual
H100-Pro
Thermo Control
HC110-Pro
HM100-Pro
Thermo Mix
HC M 100- Pr o
Please read the User Manual carefully before use, and follow all operating
and safety instructions!
We cannot be responsible to inform at real-time if the outline and
specifications are subject to change for improvement.
12301086
Ver.20191025

Summary

Safety Instructions

Proper Use

Inspection

Receiving Inspection

Check equipment for transport damage upon arrival.

Listing of Items

Lists all components included with the instrument package.

Control & Display

Control

Details the physical controls and buttons on the instrument panel.

Display

Explains the LCD screen layout and status indicators.

Operation

Parameter setting methods

Guides on how to input and set operational parameters like temperature and time.

Start and Stop

Instructions for initiating, pausing, resuming, and stopping instrument operations.

Running

Covers various operational modes including single step, multiple step, and program saving/loading.

Temperature calibration

Procedures for calibrating the instrument's temperature accuracy.

Restore the factory settings

Steps to reset the instrument to its default factory configuration.

Trial Run

Faults

Maintenance and Cleaning

Associated Standards and Regulations

Specifications

DLab Thermo Control H100-Pro Specifications

General

Orbit	3mm
Voltage	AC100-240V, 50/60Hz
Power Supply	AC100-240V, 50/60Hz
Temperature Control Range	RT+5℃~100℃
Timing Range	1min~99h59min
Display Accuracy	±0.1°C
Mixing Speed	300~1500rpm