2 Proper Use
The instrument is designed for heating liquids in
schools, laboratories or factories.
• Observe the minimum distances between the
devices, between the device and the wall and
above the assembly (min. 100 mm)
• This device is not suitable for using in
residential areas or other constraints mentioned
in Chapter 1.
Fig. 1
3 Inspection
3.1 Receiving Inspection
Unpack the equipment carefully and check for any
damages which may have arisen during transport.
Please contact manufacturer/supplier for technical
support.
Note：
If there is any apparent damage to the system,
please do not plug it into the power line.
3.2 Listing of Items
Tab. 1
To Next Page
