To Next PageTo Next PageWhat to do if my DLab OS20-Pro doesn’t stir?
If your DLab Laboratory Equipment isn't stirring, first ensure you've set a target speed by rotating the speed control knob and pressing it to start. Also, verify that all cable connections are firmly plugged in. If the issue persists, the belt might be broken, requiring replacement. Alternatively, the driven board or photosensor could be faulty and need replacing.
How to troubleshoot a DLab OS20-Pro with no operation response (LED off)?
If your DLab Laboratory Equipment shows no operation response and the LED is off, start by checking and connecting the power supply, then power it on again. Ensure that the power switch is turned on. If the problem continues, open the instrument and check all cable connections, reconnecting them as needed.
Why is the speed control inaccurate on my DLab Laboratory Equipment?
If the speed control on your DLab Laboratory Equipment isn't accurate, the drill chuck might be faulty and require replacement. Alternatively, the photosensor could be failing and need replacing.
Essential safety guidelines for operating the overhead stirrer, including proper grounding, personal protective equipment, and safe environment setup.
Procedure for unpacking and checking the instrument for transport damage before connecting to power.
Details the standard components included with the instrument, such as the main unit, power cable, and user manual.
Instructions for assembling the stand and attaching the main unit securely to ensure stability and safety.
Guide on plugging in and adjusting the depth of the stirring impeller into the vessel using the drill chuck.
Visual identification and labeling of the main operational components for both LCD and LED digital overhead stirrers.
General| Brand | DLab |
|---|---|
| Model | OS20-Pro |
| Category | Laboratory Equipment |
| Language | English |
