8860 Installation and Programming Guide | Digital Monitoring Products 10
Recorded View
This function allows you to access recorded video events through the events list on the keypad.
1. In the Carousel menu, tap Video.
2. Select a camera to display on the keypad.
3. Press the Video Clips button in the bottom right corner of the keypad
screen.
4. Toggle the play/pause button to play or pause the clip. Press the
speaker button and drag the bar up and down to increase or decrease
the volume.
5. Swipe the screen left to go to the next clip. Swipe the screen right to
go to the previous clip. Pinch to zoom.
6. Press Protect Clip in the bottom right corner of the keypad screen to prevent the clip from being erased.
Recorded Clips
This function allows you to access recorded video events through the events
list on the keypad.
1. In the Carousel menu, tap Events.
2. Tap a row to select an event.
3. Swipe the screen left to go to the next event. Swipe the screen right
to go to the previous event. Pinch to zoom.
Snapshot Verification Events
This function allows you to see a snapshot from the keypad front facing
camera during an arming or disarming event. You can view snapshot events
in Events on the keypad or through Event History on Virtual Keypad.
1. In the Carousel menu, tap Events.
2. Tap a row to select an event.
3. Swipe the screen left to go to the next event. Swipe the screen right
to go to the previous event. Tap the Info icon to display the Event
Information Banner.
4. Tap the Filter icon to display the Filter Events menu. Use the Filter By
section on the left side of the screen to change how the events are
categorized. The categories include Type, Camera, Users, Dates, and
Areas. Tap Apply to activate the filter in the Events List.
5. After a filter is activated in the Events List, a horizontally scrollable
banner will display the applied filters. To remove an individual filter,
press the X on each filter.
To Next Page
Loading...