8860 Installation and Programming Guide | Digital Monitoring Products 14
Change System Wi-Fi Password
When you change your network’s Wi-Fi password, the system detects that the
password has changed and asks you to update it. To close the Incorrect Wi-Fi
Password dialog and return to the main menu, tap Ok and tap the Shield icon.
To change your password and re-establish communication, complete the following
steps.
1. Tap Ok.
2. Use the on screen keyboard to enter your password:
▶ Press ABC to enter uppercase letters
▶ Press abc to enter lowercase letters
▶ Press !@# to enter special characters
▶ Press 123 to enter numbers
3. Tap CMD.
Note: This notification refers to the panel Wi-Fi network only. The 8860 Wi-Fi settings can be found in Options.
Clean the Keypad
Failure to follow cleaning recommendations may result in equipment damage.
The Clean Screen option locks the screen for 40 seconds so you can clean it without accidentally pressing buttons.
Use gentle pressure to clean the display, screen, keys, and housing. Use only alcohol sprays or wipes that contain 70%
isopropyl alcohol to clean keypad surfaces.
Avoid spraying cleaner directly onto the keypad, oversaturating cleaning cloths, or allowing cleaner to make contact with
internal electronic components, cables, or power sources.
1. In the Carousel menu, tap Options.
2. Tap Clean Screen.
3. Use an alcohol wipe or spray a small amount of rubbing alcohol onto a clean,
dry microfiber cloth to gently wipe down all keypad touch surfaces, removing
any excess cleaner.
4. Wait 10 seconds, then completely dry all keypad surfaces.
5. If necessary, use a clean, dry microfiber cloth to gently remove streaking.
After the countdown timer expires, the keypad returns to normal operation. To exit the countdown early, press and hold
the Shield icon for 2 seconds.
To Next Page
Loading...