DMD 8860 - Get Started; Whats Included; What Youll Need; Procedure

To Next Page

To Previous Page

8860 Installation and Programming Guide | Digital Monitoring Products 1

GET STARTED

8860 7-Inch Touchscreen Keypads oer an easy to use touchscreen interface with an on-board camera, optional

panic keys, an internal speaker, a simple terminal connection to a 4-wire keypad bus, and other features. The 8860 has

enhanced Wi-Fi communications to Dealer Admin™ for video system integration and image capture when arming and

disarming at the keypad. Keypads can be mounted on a ﬂat surface with appropriate fasteners.

What’s Included

▶ One 8860 7-Inch Touchscreen Keypad

▶ Hardware pack

What You’ll Need

▶ 5/64” (2.0mm) drill bit

▶ #2 Phillips screwdriver

Procedure

This guide walks you through the required steps needed to install an 8860 keypad. They are:

1. Install the keypad.

2. Use the keypad.

3. Program the panel.

4. Program the keypad.

5. Program the carousel menu.

6. Program keypad options.

7. Connect the keypad to Wi-Fi.

8. Program Z-Wave devices.

9. Train your customers.