EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 25
Linux installation For Debian7.0/ Ubuntu10.04
Regarding the system installation of Debian7.0/ Ubuntu10.04, please follow the steps and
suggestions to complete the system installation on the EBOX-335xDX3 Series. Following brief
instruction, users may configure it according to their specific needs.
1. Basic system installation
For Debian7.0, after booting from installation CD, moving straight to install would get a text
mode system only, please choose Graphic Install for Graphical User Interface OS installation.
Set basic configuration such as language, keyboard map and time zone, etc. steps by steps.
Then the system will detect the network hardware, and ask users to load the firmware files for
network device rtl8168, just answer no for this inquiry and move forward.
Next the system will detect multiple network interfaces on the EBOX-335xDX3 Series, and users
have to decide the primary network interface, both of them could be chosen.
Note: Ethernet cable must be plugged in during this period.
To Next Page
Loading...
Need help?
General
