[DP-DS820/DP-DS820 (A) Printer Driver] Instruction Manual (For Windows 11)
* A warning message is displayed when a media type not supported by the
printer has been loaded.(Figure 2.2.6.2)
The printer cannot be recognized.
Connect the printer and computer, and then
turn on the power.
The head is being cooled.
Please wait a while. Printing will resume
automatically.
The ribbon is not set correctly.
Reload the ribbon properly.
The printer settings and size of the installed
ribbon do not match.
Check the paper size setting and ribbon size.
A paper jam was detected.
Remove the paper and reload it properly.
The scrap box is being detached.
Attach the scrap box.
System error.
Restart the printer and computer. If the
printer does not recover after the restart,
contact the service center.
Total count of printed sheets.
Version of the control program of the printer. xx.xx indicates the version.
• DS820A xx.xx (For the United States)
• DS820 xx.xx (For other countries)
Serial number of the printer.
Printer color control data.