DNP DP-QW410 - Chapter 1 Installation

1
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
Chapter 1 Installation
Installation procedure
The installation procedure is made up of three steps.
The details of each step are explained below.
Step 1 Prepare the printer and computer → “1.1 Prepare the printer and computer”
Step 2 Install the driver package → “1.2 Install the driver package”
Install the driver package.
Step 3 Install the printer driver → “1.3 Install the printer driver”
Connect the USB cable, switch on the printer, and
then install the printer driver.
After installation is complete, restart the computer.
At this point, the USB cable is not
yet connected.
On
USB cable