2
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
1.1 Prepare the printer and computer
Make sure that the printer power is off.
Prepare a USB cable. However, do not use the USB cable to connect the printer and computer at this
time.
Log in to Windows as an administrator. The following explanation presumes that the operations are
carried out with administrator privileges.
1.2 Install the driver package
Open Windows Explorer, and then click the corresponding drive.
Select the following installation folder.
Driver package folder\DP-QW410_Driver
Figure 1.2.1 Driver Package folder
CAUTION:
The display settings of the computer must be set as follows. If the settings differ from the
following, the printing preferences screen and other items may not fit in the display area.
· Resolution: At least 1280x800
· Size of text and other items (DPI): 100%
NOTE: You must UNINSTALL the previous DNP printer driver PRIOR to installing the DNP v1.0.1.2
or later version Windows11 driver, especially when the PC has been upgraded from Windows 10 to
Windows 11.
To Next Page
Loading...
