DNP DS?RX1 - Setting up the Scrap Box; Setting the Paper Tray

15
Dai Nippon Printing Co.,Ltd.
[DS-RX1 Printer Driver] Instruction Manual for Windows Vista
2.2.2 Advanced Options
By selecting [Advanced] in the Layout window, various settings can be made using Advanced Options.
Paper Size
You can designate the paper size. Please match the paper size to the media size with which the printer is
equipped
Copy Count
You can designate the number of times an image will be printed.
Print Quality
You can designate the print quality.
Print Quality
Function
300 x 300dpi
Printing in the high-speed mode
300 x 600dpi
Printing in the high-quality mode
(If the application can not set an asymmetric aspect resolution, please set the 600x600dpi.)
600 x 600dpi
Printing in the high-quality mode
(Printer driver converts to 300x600dpi data, and sends it to the printer.)
ICM Method
ICM Method
Function
ICM Disabled
2.2.4 Synchronous with “Color Management: None” in paper option.
ICM Handled by Host System
2.2.4 Synchronous with “Color Management: ICM” in paper option.
Performs color management with the driver.
ICM Handled by Printer
This is the same as setting “ICM Handled by Host System”.
ICM Intent
This designates the rendering method when using ICM. Always have the ICC profile for the DS-RX1 set
to “Picture”. Please do not use it at other settings.
Advanced Printing Features
Always have it set to “Enabled”. Please do not use it at other settings.
Pages per Sheet Layout
The layout direction of a picture is specified, when Pages per Sheet setting is multiple pages per sheet.
Border
Synchronous with the border option in the paper option.
Fig 2.2.2.2 Advanced Options tab
Fig 2.2.2.1 Advanced Settings