DNP DS?RX1 - Solving Media Errors

17
Dai Nippon Printing Co.,Ltd.
[DS-RX1 Printer Driver] Instruction Manual for Windows Vista
＜Multiple layout＞
When the DS-RX1 is using 5x7 size and 6x8 size media, 2 image layout is possible. With the printer driver paper setting,
multi-image layout is made possible, and the image sizes are as follows.
Layout designation
Driver paper setting
(layout)
Paper
Orientation
Image size width x height
（㎜）
Using media
(5x3.5) x 2
Portrait
(131.1x 92.1) x 2
5x7
Landscape
(92.1x131.1) x 2
PR (3.5x5) x 2
Portrait
(92.1x131.1) x 2
5x7
Landscape
(131.1x 92.1) x 2
(6x4) x 2
Portrait
(156.1x105.0) x 2
6x8
Landscape
(105.0x156.1) x 2
PR (4x6) x 2
Portrait
(105.0x156.1) x 2
6x8
Landscape
(156.1x105.0) x 2
Multiple layout is possible under the following conditions.
1.The printer is using 5x7 size and 6x8 size media.
2.The printer driver paper size is set to one of the above sizes.
3.Multiple images are sent from the application.
Note）Because the multi-image layout occurs on a per job basis, this works when there are multiple images for 1 job.
If you want to print the same image, be sure to send the image data for each copy to be printed. The printer
prints 2 images in one operation, and the paper is cut as it is fed out.
<Multi-image layout patterns>
The following is possible for the multi-image layout pattern.
Cut as sheet is fed out
Layout for 1 sheet with 2 same-size images