DNV VacuDAP 2002 - System Operation and Flowchart

Operation Manual
VacuDAP 2002
2002BA01e.DOC / 22.07.2004 11 of 22
3.3 Operation
The VacuDAP 2002 measuring system may be operated by all persons who are authorized to operate
medical X-ray equipment.
3.3.1 Schematic diagram
Figure 2 shows the program flowchart of the measuring system. The various functions will be
described in detail in the following sections.
Print
Reset
Reset
Print
Reset
+
Print
Reset
TEST function
M
EASURE function
Select
measuring mode
RESET function
PRINT function
Turn on unit
Turn on unit
Initialisation
Change
parameters
> 2 sec
Keep pushed
until
WAIT
Fig 2: Program flowchart