Operation Manual
VacuDAP 2002
2002BA01e.DOC / 22.07.2004 22 of 22
6 Accessories and options
Among others, the following accessory equipment and options are offered for the VacuDAP 2002
measuring system.
Designation Order-No. Notes
Power supply 950 00 57 with plug: EURO
Power supply 950 00 51 with plug: UK
Power supply 950 00 59 with plug: North Amerika/Japan
Display unit 70 952 952 00 02 Built-in unit
Display unit 70 953 T 953 00 01 Table-top unit (standard)
Display unit 70 953 W 953 00 02 Wall-mounted unit
Display unit 70 956 956 00 01 Table-top unit for 2-channel measuring system
Printer SEIKO 950 00 02 Thermal-printer; Typ: DPU 414
Printer cable SEIKO 952 00 40 Standard length 2.5 m (max. 15 m possible)
Printer EPSON 950 00 03 Dot-matrix-printer; Typ: TM-U210D
Printer cable EPSON 952 00 44 Standard length 2.5 m (max. 15 m possible)
Label writer DYMO 950 00 04 Label-Writer; Typ: SE 300
Labels 950 00 05 for Label writer DYMO
(DYMO-99014: 1 roll, 220 pieces; 101 x 54)
Printer cable DYMO 952 00 46 Standard length 2.5 m (max. 15 m possible)
Interface cable RS-232 952 00 41 for data transfer to PC, standard length 2.5 m
(max. 15 m possible)
Interface cabel RS-232 for 70 956 956 00 41 for data transfer to PC with display unit 70 956,
standard length 2.5 m (max. 15 m possible)
Software DAP-Monitoring 950 00 20 Data display and storing with PC
(remote control from PC)
Software DAP-Storing 950 00 21 Data storing with PC
Table 9: Accessories and options
To Previous Page
Loading...