Engine Off Options
After pressing the “Engine Off Options” button
on the touchscreen the following settings will be
available.
• Headlight Off Delay
When this feature is selected, the driver can
choose to have the headlights remain on for 0,
30, 60, or 90 seconds when exiting the vehicle.
To change the Headlight Off Delay status press
the “Headlight Off Delay” button on the touch-
screen and select from “0,” “30,” “60,” or “90”
buttons on the touchscreen to select your de-
sired time interval.
• Engine Off Power Delay
When this feature is selected, the power win-
dow switches, radio, Uconnect phone system (if
equipped), DVD video system (if equipped),
power sunroof (if equipped), and power outlets
will remain active for up to 10 minutes after the
ignition is cycled to OFF. Opening either front
door will cancel this feature. To change the
Engine Off Power Delay status press the “En-
gine Off Power Delay” button and select from “0
seconds,” “45 seconds,” “5 minutes” or “10
minutes” buttons on the touchscreen.
Compass Settings — If Equipped
After pressing the “Compass Settings” button
on the touchscreen the following settings will be
available:
NOTE:
Before compass calibration is performed,
the compass variance zone should be set
for best results.
• Compass Variance
Press “Compass Variance” on the touchscreen
to change this setting. You will then be able to
select a compass variance of 1 through 15 per
the compass variance zone map figure.
Compass Variance is the difference between
Magnetic North and Geographic North. To com-
pensate for the differences the variance should
be set for the zone where the vehicle is being
driven, illustrated in the zone map. Once prop-
erly set, the compass will automatically com-
pensate for the differences when calibrated,
and provide the most accurate compass head-
ings.
• Compass Calibration
Press “Compass Calibration” on the touch-
screen to enter calibration. To start calibration of
the compass, press the “YES” button on the
touchscreen and complete one or more 360-
degree turns (in an area free from large metal or
metallic objects). A message will appear on the
touchscreen when the compass has been suc-
cessfully calibrated.
Compass Variance Zone Map
163
To Next Page
Loading...
