NOTE:
Keep magnetic materials away from the top
of the instrument panel, such as Mobile
Phones, Laptops and Radar Detectors. This
is where the compass module is located,
and it can cause interference with the com-
pass sensor, and it may give false readings.
Audio
After pressing the “Audio” button on the touch-
screen the following settings will be available:
• Balance/Fade
This feature allows you to adjust the Balance
and Fade settings. Press and drag the speaker
icon or use the arrows to adjust, tap the “C” icon
to readjust to the center.
• Equalizer
When in this display you may adjust the Bass,
Mid and Treble settings. Adjust the settings with
the “+” and “–” buttons on the touchscreen or by
selecting any point on the scale between the “+”
and “–” buttons on the touchscreen.
• Speed Adjusted Volume
This feature increases or decreases volume
relative to vehicle speed. To change the Speed
Adjusted Volume press the “Speed Adjusted
Volume” button on the touchscreen and select
from “Off,” “1,” “2” or “3” buttons on the
touchscreen.
• Surround Sound — If Equipped
This feature provides simulated surround sound
mode. To make your selection, press the “Sur-
round Sound” button on the touchscreen, select
“On” or “Off.”
• AUX Volume Offset — If Equipped
This feature provides the ability to tune the
audio level for portable devices connected
through the AUX input. To make your selection,
press the “AUX Volume Offset” button on the
touchscreen, select “+” and “–.”
• Loudness — If Equipped
This feature improves sound quality at lower
volumes. To make your selection, press the
“Loudness” button on the touchscreen, select
“On” or “Off.”
Phone/Bluetooth
After pressing the “Phone/Bluetooth” button on
the touchscreen the following settings will be
available:
• Paired Phones
This feature shows which phones are paired to
the Phone/Bluetooth system. For further informa-
tion, refer to the Uconnect Supplement Manual.
• Paired Audio Sources
This feature shows which audio devices are
paired to the Phone/Bluetooth system. For fur-
ther information, refer to the Uconnect Supple-
ment Manual.
Restore Settings
After pressing the “Restore Settings” button on
the touchscreen the following settings will be
available:
• Restore Settings
When this feature is selected it will reset the
Display, Clock, Audio, and Radio Settings to their
default settings. To restore the settings to their
default setting, press the “Restore Settings” but-
ton and select from “Yes” or “No.” If “Yes” is
164
To Next Page
Loading...
