Keyless Push Button Ignition
This feature allows the driver to operate the ignition with the push of a button, as long as
the key fob is in the passenger compartment.
The Keyless Push Button Ignition has three operating positions which are labeled and will
illuminate when in position. The three positions are OFF, ACC, and ON/RUN.
Key Not Detected Feature
If the ignition position does not change with a push of the ignition button, and the
instrument cluster display message “Key Fob Not Detected” is being displayed, the key
fob may have a low or dead battery. In this situation, a back up method can be used to
operate the keyless push button ignition. Put the nose side (side opposite of the
emergency key) of the key fob against the keyless ignition push button and push to operate
the ignition. Once the starter engages and the engine starts remove the key fob from the
keyless ignition push button.
Keyless Push Button Ignition
Low Or Dead Key Fob Battery Starting Proce-
dure
GETTING STARTED
11
To Next Page
Loading...
