Dodge DURANGO 2017 - Memory Position Recall; Easy Entry;Exit Seat; Driver One Memory Position Recall; Driver Two Memory Position Recall

NOTE:
If a memory profile has not already been set, refer to "Programming The Memory Feature"
in this section for instructions on how to set a memory profile.
3. Once the profile has been recalled, push and release the set (S) button on the memory
switch.
4. Within five seconds, push and release button (1) or (2) accordingly. “Memory Profile
Set” (1 or 2) will display in the instrument cluster .
5. Within 10 seconds, push and release the lock button on the key fob.
NOTE:
Your key fobs can be unlinked to your memory settings by pushing the set (S) button, and
within 10 seconds, followed by pushing the unlock button on the key fob.
Memory Position Recall
NOTE:
The vehicle must be in P ARK to recall memory positions. If a recall is attempted when the
vehicle is not in P ARK, a message will appear in the instrument cluster display.
Driver One Memory Position Recall
• To recall the memory settings for driver one using the memory switch, push memory
position button (1) on the memory switch.
• To recall the memory settings for driver one using the key fob, push the unlock button
on the key fob linked to memory position 1.
Driver Two Memory Position Recall
• To recall the memory setting for driver two using the memory switch, push memory
position button (2) on the memory switch.
• To recall the memory settings for driver two using the key fob, push the unlock button
on the key fob linked to memory position 2.
A recall can be cancelled by pushing any of the memory buttons during a recall (S, 1, or
2). When a recall is cancelled, the driver's seat, and the power tilt and telescopic steering
column (if equipped) stop moving. A delay of one second will occur before another recall
can be selected.
Easy Entry/Exit Seat
This feature provides automatic driver’ s seat positioning to enhance driver mobility when
entering and exiting the vehicle.
The distance the driver’ s seat moves depends on where you have the driver’ s seat
positioned when you remove the key fob from the ignition (or change the ignition to OFF,
for vehicles equipped with Keyless Enter -N-Go).
GETTING STARTED
62