SPEED CONTROL
When engaged, the Speed Control takes over accelerator operations at speeds greater than
25 mph (40 km/h).
The Speed Control buttons are located on the right side of the steering wheel.
NOTE:
In order to ensure proper operation, the
Speed Control System has been designed to
shut down if multiple speed control func-
tions are operated at the same time. If this
occurs, the Speed Control System can be
reactivated by pushing the Speed Control
on/off button and resetting the desired ve-
hicle set speed.
To Activate
Push the on/off button to activate the
Speed Control. “CRUISE CONTROL
READY” will appear on the instrument clus-
ter display to indicate the Speed Control is
on. To turn the system off, push the on/off
button a second time. “CRUISE CONTROL
OFF” will appear on the instrument cluster
display to indicate the Speed Control is off.
The system should be turned off when not
in use.
WARNING!
Leaving the Speed Control system on when not in use is dangerous. Y ou could
accidentally set the system or cause it to go faster than you want. Y ou could lose control
and have an accident. Always leave the system off when you are not using it.
To Set A Desired Speed
Turn the Speed Control on. When the vehicle has reached the desired speed, push the SET
(+) or SET (–) button and release. Release the accelerator and the vehicle will operate at
the selected speed. Once a speed has been set a message, “CRUISE CONTROL SET TO
MPH (km/h)”, will appear indicating what speed was set. A cruise indicator lamp, along
with set speed will also appear and stay on in the instrument cluster display when the
speed is set.
Speed Control Switches
1 — Push Cancel
2 — Push Set+/Accel
3 — Push Resume
4 — Push On/Off
5 — Push Set-/Decel
OPERATING YOUR VEHICLE
78
To Next Page
Loading...
