EasyManua.ls Logo

Dodge DURANGO 2017 - Setting the Time; Background Themes; Audio Settings; Equalizer

Dodge DURANGO 2017
284 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CAUTION!
Do NOT attach any object to the touchscreen, doing so can result in damage to the
screen.
Setting The Time
Model 8.4 NA V synchronizes time automatically via GPS, so it should not require any
time adjustment. If you do need to set the time manually, follow the instructions below
for Model 8.4 NA V.
For Model 8.4, turn the unit on, then press the time display at the top of the screen.
Press “Yes.”
If the time is not displayed at the top of the screen, press the “Settings” button on the
touchscreen. In the Settings screen, press the “Clock” button on the touchscreen, then
check or uncheck this option.
Press “+” or “–” next to Set Time Hours and Set Time Minutes to adjust the time.
If these features are not available, uncheck the Sync Time box.
Press “X” to save your settings and exit out of the Clock Setting screen.
Background Themes
Screen background themes are selectable from a pre-loaded list of themes. If you’d like
to set a theme, follow the instructions below.
Press the “Settings” button on the touchscreen.
Press the “Display” button on the touchscreen.
Then press “Set Theme” button on the touchscreen and select a theme.
Audio Settings
Press of the “Audio” button on the touchscreen to activate the Audio settings screen to
adjust Balance\Fade, Equalizer , and Speed Adjusted V olume.
Y ou can return to the Radio screen by pressing the “X” located at the top right.
Balance/Fade
Press the “Balance/Fade” button on the touchscreen to Balance audio between the
front speakers or fade the audio between the rear and front speakers.
Pressing the “Front,” “Rear,” “Left,” or “Right” buttons on the touchscreen or press
and drag the Speaker Icon to adjust the Balance/Fade.
Equalizer
Press the “Equalizer” button on the touchscreen to activate the Equalizer screen.
Press the “+” or “–” buttons on the touchscreen, or press and drag over the level bar
for each of the equalizer bands. The level value, which spans between plus or minus
nine, is displayed at the bottom of each of the Bands.
ELECTRONICS
142

Table of Contents

Other manuals for Dodge DURANGO 2017

Related product manuals